Huawei LampSite Installation Manual page 16

LampSite
Installation Guide
Installing an RHUB in a 19-Inch Cabinet or Rack
Installing an RHUB in a 19-inch cabinet or rack: Secure the mounting ear to the mounting bracket
by using M6 screws.
l
l
Figure 4-3
Figure 4-3 Installing an RHUB in a 19-inch cabinet or rack in standard mode
Figure 4-4 Installing an RHUB in a 19-inch cabinet in reverse mode
Installing an RHUB in a 19-Inch Shelf
When an RHUB is installed in a 19-inch shelf, the shelf must be installed on a wall. One shelf
can house multiple RHUBs with 1 U space between two RHUBs.
Issue 02 (2014-05-27)
If there is no other modules installed in the 1 U space near the RHUB, install the RHUB
directly. Otherwise, remove the modules before installing the RHUB.
Before installation, you need to check the installation mode supported by the rack and adjust
the position of the mounting ear.
and Figure 4-4 show RHUBs installed in a cabinet or rack, respectively.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing an RHUB
11