Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei O2 4G Pocket Hotspot Plus Mobile WiFi Pro
Summary of Contents for Huawei O2 4G Pocket Hotspot Plus Mobile WiFi Pro
- Page 1 Quick Start...
- Page 3 Thank you for purchasing the O2 4G Pocket Hotspot Plus Mobile WiFi Pro (Mobile WiFi for short). Mobile WiFi allows you to connect to high speed mobile broadband from any Wi-Fi capable device. This document will help you understand your Mobile WiFi so you can start using it right away. Please read this document carefully before using your Mobile WiFi.
-
Page 4: Application Scenarios
Getting to Know Your Mobile WiFi Note: The Mobile WiFi function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. Application Scenarios Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can all access the Internet through the Mobile WiFi. - Page 5 Scenario 1: Accessing the Internet Using an 4G, 3G, or 2G Network The Mobile WiFi uses your operator's 4G, 3G, or 2G network to access the Internet. 4G/3G/2G...
- Page 6 Scenario 2: Accessing the Internet Using Ethernet (WAN) Connect the Mobile WiFi's network port to an Ethernet port using a network cable. You can then access the Internet via Ethernet, such as a home ADSL, hotel DHCP, or campus static IP broadband network.
- Page 7 Scenario 3: Accessing the Internet Using a Wi-Fi Network The Mobile WiFi supports the Wi-Fi extender function. When you use the Mobile WiFi in Wi-Fi coverage areas, for example, an airport, cafe, hotel, or your home, your Mobile WiFi will connect to known Wi-Fi hotspots, helping you save mobile data usage.
- Page 8 Appearance Screen Power button Lanyard hole Charging port WPS button Micro USB port Slot cover Ethernet port...
- Page 9 Screen 100% Roaming R: Data roaming turned on. Signal strength 0 B/2GB : Signal strength from weak to strong. Network type 4G/3G/2G: Connected to an 4G/3G/2G network. : Connected to WLAN. : Connected to Ethernet. ...
- Page 10 To set the start date of the monthly data usage statistics and data usage limit, go to the HUAWEI HiLink APP or the web management page. Data traffic information is for your reference only. For more accurate data traffic ...
- Page 11 SSID and Wireless Network Encryption Key When a Wi-Fi device establishes a connection to the Mobile WiFi for the first time, you may need to enter the default Service Set Identifier (SSID) and wireless network encryption key. The default SSID and encryption key are printed on the Mobile WiFi label. It is recommended that you change your SSID and wireless network encryption key the first time you log in to the web management page.
- Page 12 Getting Started Installing Install the SIM card and microSD card according to the illustration. Note: Do not remove the SIM/microSD card when it is in use. Doing so will affect the performance of your Mobile WiFi and data stored on the SIM/microSD card may be lost.
-
Page 13: Charging The Battery
Charging the Battery The device has a built-in, non-removable battery. Do not attempt to remove the battery; otherwise the device may be damaged. To replace the battery, take the device to an authorized service center. If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the Mobile WiFi may not power on immediately after the charger is plugged in. - Page 14 The charger is an optional accessory. If it is not included in the package, you may contact an authorized dealer to buy a charger compatible with the Mobile WiFi. The Mobile WiFi's charger model is HW-050200XYW. X and Y represent letters or ...
- Page 15 Charging Other Devices Using a USB Cable The Mobile WiFi can work as a portable power supply (rated output: 5 V, 2 A) for other devices, such as phones, tablets, music players, and Bluetooth headsets. You can charge those devices by simply connecting them to the Mobile WiFi using a USB cable.
- Page 16 Charging Other Devices Using the Charging Sling You can also charge other devices by simply connecting them to the Mobile WiFi using the charging sling. The devices can be charged only when the Mobile WiFi is on. Note: The charging sling is intended as a carrying device only. Do not be tempted to swing the device around using it.
- Page 17 Attaching the Charging Sling Thread the charging sling through the lanyard hole. Use tweezers or other tools to pull it through. Wrap the charging sling around the groove at the top of the lanyard hole and pull tight. Note: For other tools, common household tools may be used to assist.
- Page 18 Removing the Charging Sling Push the charging sling in the direction of the arrow shown in the following figure until it becomes loose. Remove the charging sling.
- Page 19 Turning On the Mobile WiFi Press and hold the button until the screen lights up, indicating that the Mobile WiFi is turned on. Note: Press and hold the button to turn off the Mobile WiFi. If the Mobile WiFi is malfunctioning, forcibly restart it by pressing and holding the ...
- Page 20 Verifying the PIN If the Mobile WiFi's network parameters have been correctly configured but you cannot access the Internet after powering it on, PIN verification may be enabled. Log in to the web management page and enter the PIN when prompted. To avoid entering the PIN every time you power on the Mobile WiFi, disable PIN verification from the web management page.
-
Page 21: Connecting To The Internet
Connecting to the Internet Using an 4G, 3G, or 2G Network The Mobile WiFi's management parameters have been preset according to your operator's requirements. If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data is not transmitted for a period of time, the Mobile WiFi will automatically disconnect from the network connection. -
Page 22: Using Ethernet (Lan)
Using Ethernet (LAN) Use a network cable to connect your device to the Ethernet port on the Mobile WiFi. Make sure is displayed. Your device will be allocated an IP address by the Mobile Wifi and you can access the Mobile WiFi’s web management page. - Page 23 Using Ethernet (WAN) Use the network cable to connect the Mobile WiFi to the router. Make sure is displayed and is not. Log in to the Mobile WiFi's web management page and configure the parameters of the Ethernet connection. Dynamic IP: Does not need to be configured. ...
-
Page 24: Using A Wi-Fi Network
Using a Wi-Fi Network Ensure that the Wi-Fi extender function is enabled. The Mobile WiFi automatically connects to a Wi-Fi hotspot set by your service provider or yourself. When the Mobile WiFi is connected to a Wi-Fi network, and the Wi-Fi hotspot SSID are displayed on the screen. - Page 25 Turning Wi-Fi extender On or Off You can log in to the Mobile WiFi's web management page to enable or disable Wi-Fi extender. Adding a Wi-Fi Hotspot Log in to the web management page. From the settings page, choose Wi-Fi extender. Scan for Wi-Fi hotspots and connect to the desired one.
-
Page 26: Logging In To The Web Management Page
Logging In to the Web Management Page Make sure the connection between the Mobile WiFi and the Wi-Fi device or computer is working normally. Open the browser, and enter http://192.168.3.1 in the address box. Note: If the IP address conflicts with other IP addresses on the network, the IP address of the Mobile WiFi automatically changes. -
Page 27: Battery Saving Mode
Battery Saving Mode If the Mobile WiFi has been inactive for some time, the Mobile WiFi enters the standby mode, in which the display screen turns off. Pressing any button causes the display screen to light up. When the Mobile WiFi is being powered only by the battery, you can choose to enable or disable the automatic Wi-Fi turnoff function. - Page 28 Connecting an Android Device to the Mobile WiFi Using a QR- code Search for HUAWEI HiLink in Google Play or HUAWEI App Center and download the app to your Android device. Scan the QR-code on the Mobile WiFi label using the HUAWEI HiLink APP.
-
Page 29: Establishing A Wps Connection
Establishing a WPS Connection If the Wi-Fi device to be connected to the Mobile WiFi supports WPS, the wireless network encryption key is generated automatically and there is no need to enter it manually. The steps for WPS connection are as follows: Turn on the Mobile WiFi. - Page 30 Sharing Storage When the Mobile WiFi is connected to a storage device, such as a USB flash drive or portable hard disk, you can share the device's data using the HUAWEI HiLink APP or the Mobile WiFi web management page.
-
Page 31: Restoring To Factory Settings
Restoring to Factory Settings If you forget the user name, password, or SSID you have set, you can restore the settings on the web management page to their factory values. To do so, simply press and hold the Reset button until the Mobile WiFi restarts. - Page 32 Example 1: Connecting to a Computer (for example, running the Windows 7 operating system) through Wi-Fi Ensure that the Mobile WiFi's Wi-Fi function is on. Select Start > Control Panel > Network and Internet > Network and Sharing Center > Connect to a network.
- Page 33 Pressing will display the current SSID and wireless network encryption key on the screen. Wait a moment for the wireless network connection icon to appear in the system tray in the lower right corner of the computer screen. The wireless network connection is then established.
- Page 34 Example 2: Connecting to a Tablet Computer (for example, iPad) through Wi-Fi Touch Settings > Wi-Fi to turn on WLAN. The tablet computer automatically searches for wireless connections and displays a list of access points. Select the access point with the Mobile WiFi's SSID.
- Page 35 Tips When the Mobile WiFi is in use for an extended period of time, it will become warm and may overheat. Should this happen, the Mobile WiFi will automatically close the network connection and turn off to protect itself from damage. If this occurs, place the Mobile WiFi in a well-ventilated space to allow the heat to dissipate, then turn it on and continue to use it as normal.