Huawei LampSite Installation Manual page 24

LampSite
Installation Guide
l
Issue 02 (2014-05-27)
Figure 4-12 Pushing an RHUB into a cabinet
2. Use a torque screwdriver or Phillips screwdriver to tighten the four M6×16 screws
with a torque of 2 N•m, as shown in
Figure 4-13 Tightening screws
The following describes how to install an RHUB with mounting ears aligned with the
RHUB panel:
NOTE
If necessary, request one more person for assistance.
1. Remove the mounting ears on both sides of the RHUB by removing the four M4×8
screws, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 4-14.
4 Installing an RHUB
4-13.
19