Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei AI Cube
Summary of Contents for Huawei AI Cube
- Page 1 Quick Start...
- Page 2 96725308_01...
- Page 3 Place the AI Cube away from noisy environment, but close enough for you to have easy access to, such as on the tea table in the living room or bedside cabinet in your...
- Page 4 Off: No device is connected to the LAN port. Blinking: Data is being transmitted through the LAN port. On: The LAN ports is connected to a device. 4. Power button Press and hold to power the AI Cube on or off.
- Page 5 On: The microphone is disabled. Off: The microphone is enabled. 13. Light ring The color of the light ring indicates the AI Cube's status. When the light ring is blue, AI Cube is ready for your requests. 14. Micro-SIM card slot Accommodate a micro-SIM card.
- Page 6 To remove the micro-SIM card, gently press the micro-SIM card in until it clicks. The card will automatically pop out. • Do not insert or remove a micro-SIM card when the AI Cube is running, as this may affect performance or damage the micro-SIM card.
- Page 7 Connect the power adapter to the AI Cube.
- Page 8 Once the AI Cube has connected to a mobile data network, you can connect your computer or mobile phone to the AI Cube's Wi-Fi network to access the Internet. Please refer to the label on the bottom of the AI Cube for the default wireless network name (Wi-Fi Name) and password (Wi-Fi Password).
- Page 9 HiLink app. Method 2: Managing the AI Cube using the web-based management page. Please refer to the label on the bottom of the AI Cube for the default IP address, and password. IP :X X X .X X X .X .X P assw ord:zzz XXX.XXX.X.X...
- Page 10 Since Amazon Alexa is a service provided by Amazon, you need an Amazon account to use the voice service function. Create or use an existing Amazon account by following on- screen instructions in the HiLink app, and log in to associate the AI Cube and your Amazon account.
- Page 11 Alexa, what time is it now? Alexa, stop. Alexa, volume five. (1–10) Alexa, cancel. Alexa, repeat. For more examples, go to Help in the Amazon Alexa app. Switching language Open the HiLink app, touch on the home screen to set a language. Remove voice service Open the HiLink app, touch on the home screen, touch your Amazon account and...
- Page 12 Optional configurations You can connect the AI Cube to a wall-mounted Ethernet port using an Ethernet cable to connect to the Internet when you have wired network. Configure the relevant settings on the web-based management page before connecting to the Internet through an Ethernet port. More information can be found in the web- based management page.
- Page 13 Cube. How do I restore factory settings? When the AI Cube is turned on, Use a sharply pointed object to press and hold the RESET button until the Power indicator turns off. Restoring factory settings will restore the settings to the default. You can reconfigure them after the AI Cube is restored.
- Page 14 1. Say "Alexa, turn on Bluetooth" to enable Bluetooth in the AI Cube. 2. Enable Bluetooth on your phone. 3. Select AI Cube from the device list. The Bluetooth name of AI Cube is the same as the Wi-Fi name.
- Page 15 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
- Page 16 Ideal operating temperatures are 0°C to 40°C. Ideal storage temperatures are -20°C to +70°C. Extreme heat or cold may damage your device or accessories. Keep the device and accessories in a well-ventilated and cool area away from direct sunlight.
- Page 17 violate local regulations and laws, and may be dangerous. Please contact your retailer for information about the availability of approved accessories in your area. Power adapter safety The power plug is intended to serve as a disconnect device. For pluggable devices, the socket-outlet shall be installed near the devices and shall ...
- Page 18 EU regulatory conformance Statement Hereby, Huawei Technologies Co., Ltd. declares that this device B900-230 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://consumer.huawei.com/certification.
- Page 19 WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range. ErP Product Information Huawei Technologies Co., Ltd. hereby declares that its products conform to the Energy- related Products Directive (ErP) 2009/125/EC. For detailed ErP information and the user manuals required by Commission Regulation, please visit: http://consumer.huawei.com/en/certification.
- Page 20 For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://consumer.huawei.com/certification. Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.
- Page 21 Bluetooth ® SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Other trademarks, product, service and company names mentioned may be the property of their respective owners.
- Page 22 In addition, this device supports the automatic downloading and installation of important updates from Huawei or your carrier in cases of emergency. This function is enabled by default. To disable this function, please log in to the product management...