Installing Adapter Power Cables - Huawei LampSite Installation Manual

LampSite
Installation Guide
Figure 5-41 Installing jumpers between the pRRU and external antennas
----End

5.7.8 Installing adapter power cables

The pRRU can be powered by the AC/DC power adapter.
Prerequisites
l
Context
l
Procedure
Step 1 The X1 end is connected to the PWR port on the pRRU, as shown in
Step 2 The X2 end (the C13 female connector on the AC/DC power adapter cable) is connected to the
AC power input port, as shown in
Step 3 The X3 end is connected to the external power supply port of the AC adapter, as shown in
5-42.
Issue 02 (2014-05-27)
The pRRU use the AC/DC power adapter to obtain power supply, and the AC/DC power
adapter is installed.
One end of the adapter power cable is the C13 female connector, which is connected to the
C14 male connector on the adapter, and the other end of the adapter power cable is
connected to the AC power socket.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-42.
5 Installing a pRRU
Figure 5-42.
Figure
86