Huawei LampSite Installation Manual page 30

LampSite
Installation Guide
l Rotate the mounting ears 90 degrees clockwise, and use a torque screwdriver or Phillips
Step 2 Determine the position on the wall for installing the RHUB based on the requirements in the
engineering blueprint and
RHUB to the position to be installed against the wall, and then mark the four anchor points where
the mounting ear screws are fastened using a marker, as shown in
Issue 02 (2014-05-27)
Figure 4-22 Removing screws and mounting ears
screwdriver to secure the mounting ear with a torque of 1.4 N•m, as shown in
Figure 4-23 Installing mounting ears and screws
4.1.2 Installation Clearance Requirements of an
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing an RHUB
Figure
RHUB. Place the
Figure 4-24.
4-23.
25