Setting Procedure For The Ip Address - Mitsubishi Electric GOT2000 Series User Manual

2.4.3

Setting procedure for the IP address

■1. Ethernet standard port, Ethernet standard port 1, and wireless LAN I/F
(1) IP address, subnet mask, default gateway, peripheral software port No., and transparent port No.
Step 1.
Touch the entry box for the setting item to display a software keyboard.
Input a value with the keyboard.
Example) For GT27
Step 2.
Touch the [OK] button to restart the GOT and reflect the setting.
To cancel the setting, touch the [Cancel] button to return to the main menu.
(2) Behavior of duplicate IPs
This item is settable in [Ethernet standard port] or [Ethernet standard port 1].
Step 1.
Touch the selection for the setting item to switch the selection.
This setting determines the behavior of the GOT when a device with the same IP address connects to the
network on which the GOT resides.
• [Maintain a network connection (rec)]
Displays a system alarm, and maintains the network connection for the GOT.
• [Do not maintain a network connection]
Disconnects the GOT from the network.
Example) For GT27
POINT POINT POINT
Settings of [Per. S/W port No.] and [Transparent port No.]
You cannot set the same port number for [Per. S/W port No.] and [Transparent port No.].
Set a different port number for each setting item.
2 - 15
2.4 IP Address
2