Sram Management Operation - Mitsubishi Electric GOT2000 Series User Manual

6.10.4

SRAM management operation

■1. Operation to initialize all or selected areas of the SRAM user area
Step 1.
Perform any of the following operations.
•To initialize all areas of the SRAM user area, touch the [Initialize all] button.
•To initialize selected areas of the SRAM user area, select the check box of the area to be initialized, and
then touch the [Initialize selected area] button.
Step 2.
The dialog box shown below appears.
Check the description of the dialog box. To initialize the SRAM user area, touch the [OK] button.
To cancel the initialization, touch the [Cancel] button.
(Example: Dialog box if the [Initialize all] button is touched)
Step 3.
When touching the [OK] button in step2, the dialog box shown below appears for recheck.
To start the initialization, touch the [OK] button.
To cancel the initialization, touch the [Cancel] button.
Step 4.
The completion dialog box appears when the initialization is completed.
To close the dialog box and restart the GOT, touch the [OK] button.
6 - 114
6.10 SRAM management