Mitsubishi Electric GOT2000 Series User Manual page 144

When the input is completed, touch the [Enter] key.
9) Continuous failure count
Touch [Continuous failure count], and then the Continuous failure count input dialog is dis-played.
Input the continuous failure count.
When the input is completed, touch the [Enter] key.
For information on how to unlock an operator ID, refer to the following.
➠
10) Set password requirements
Touch [Check password requirements] and select the check box.
Touch [Set minimum length], and then the Enter minimum password length dialog is displayed.
Input the number of characters.
Touch [Set character type] and set the char-acter type.
When the input is completed, touch the [Enter] key.
2 - 100
2.15 Operator Authentication
(6) Edit operation