Mitsubishi Electric GOT2000 Series User Manual page 109

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

(1) How to select a keyword protection level

For equipments that are allowed to operate the FX PLC on line, 3 levels of protection level

When performing monitoring or changing settings with any on-line equipment is required, set

password with referring to the following.

(a) When setting keyword only

Select a protection level by the initial letter of keyword.

All operation

Set a keyword with initial letter of "A", "D" to "F", or "0" to "9".

Read/Incorrect write protection: Set a keyword with initial letter of "B".

Incorrect write protect: Set a keyword with initial letter of "C".

(b) When setting keyword and 2nd keyword

Select a protection level by [Registration condition].

(2) Monitoring availability at each keyword protection level

Device monitoring availability at each keyword protection level is shown in the following.

Monitoring devices

T, C set value

and file register

(D1000 and the

Other than the

(3) Difference between all online operations prohibition and all operations prohibition

When specifying All online operations prohibited, displaying devices and inputting data with a

programming tool or GOT are all prohibited.

When all operations are prohibited, displaying devices and inputting data with the GOT are

enabled while all operations using a programming tool are prohibited.

When setting keyword only

When setting keyword and 2nd

2.10 Controller