Broadcasting The Clock Data - Mitsubishi Electric GOT2000 Series User Manual

2.9.4

Broadcasting the clock data

Notify the clock data of the GOT to the controller for synchronization with the GOT.
■1. Time notification setting
Item
Broadcast the clock data
Broadcast CH No.
Trigger type
Specify the time zone of target
unit
Time zone
Time difference from GMT
*1 If [Broadcast the clock data] is deselected or [Trigger Type] is set to [Sampling] in [GOT Setup] in the project data, only [Sampling]
is selectable as the trigger type for the time notification in the utility.
*2 If [Broadcast the clock data] is deselected or [Trigger Type] is set to [Sampling] in [GOT Setup] in the project data, [No setting] is
displayed for the device.
Set whether to use the time notification function.
Set a channel used for the time notification.
Set the trigger type for the time notification.
• When selecting [Sampling] for [Trigger type], set the
sampling interval for the time notification.
• When selecting [Rise] or [Fall] for [Trigger type],
information on the device set as a trigger is displayed.
Set whether to specify the time zone of the target
controller.
When selecting [Specify the time zone of target unit], set
the time zone.
When selecting [Custom] for [Time zone], set the time
difference based on GMT.
POINT POINT POINT
Settings of [Broadcast] in the utility
Configure the settings in the utility and in [GOT Setup] on GT Designer3 by the same method.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description
*1
Setting range
Selected/Not selected
<Default: Not selected>
CH 1, CH 2, CH 3, CH 4
<Default: 1>
Trigger type: Rise/Fall/Sampling
<Default: Sampling>
Sampling interval: 1 to 1440
<Default: 60>
*2
Selected/Not selected
<Default: Not selected>
GMT-12:00 to GMT+13:00/Custom
<Default: GMT+9:00>
Hour: -12 to 13
Minute: 0, 15, 30, or 45
<Default: 0 hour 0 minute>
2.9 Time
2
2 - 41