Clock Synchronization Method - Mitsubishi Electric GOT2000 Series User Manual

14.1.2

Clock synchronization method

The following shows the clock synchronization method on the GOT
Clock synchronization method
Adjust
*1
Broadcast
Using Adjust and Broadcast
*1
together
*1
14 - 2
14.1 Time Setting and Display
Acquire the clock data of the controller and change the clock data of the GOT.
2013/4/1
12 : 45 : 07
When the GOT is powered on, set the clock data of the GOT to that of the controller.
Since the GOT does not have to hold the clock data while the GOT is powered off, no battery is required.
To set the controller clock data of the controller, refer to the manual of the controller you use.
Notify the clock data of the GOT to the controller to change that of the controller.
2013/4/1
12 : 45 : 07
At the timing of the trigger, set the clock data of the controller to that of the GOT.
Since the GOT must hold the clock data while the GOT is powered off, a battery is required.
Set the clock data of the GOT in the utility.
Acquire the clock data of the controller by Adjust. Then change the clock data of other controllers by Broadcast.
2013/4/1
12 : 45 : 07
PLC
GT2103-P cannot be specified.
POINT POINT POINT
Details of the clock synchronization method
For the details of the clock synchronization method, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description
Clock data
PLC
2013/4/1
12 : 45 : 07
Adjust
GOT
2013/4/1
12 : 45 : 07
GOT
2013/4/1
12 : 45 : 07
Clock data
2013/4/1
12 : 45 : 07
Broadcast