16.2.2
Specifications
■1. System configuration
This section describes the system configuration of the MELSEC-FX list editor.
For the setting method in each connection form, used communication unit/cable and cautions on connection form, refer
to the following manual.
➠
GOT2000 Series Connection Manual For GT Works3 Version1
■2. Controllers that can be edited with the MELSEC-FX list editor
*1
Target controller
FX CPU
*1
FX list editor is not applicable to for MELSEC iQ-F series.
■3. Connection forms
This function can be used in the following connection types.
( : Available, : Unavailable)
Name
MELSEC-FX list
editor
*1
MELSEC-FX list editor cannot be used when using CC-Link IE field network Ethernet adapter.
*2
Available only when using FX3 series.
Function name
Description
Sequence program writing, parameter
setting, PLC diagnostics and keyword
registration, etc.
Connection form between GOT and PLC
Direct CPU connection
16.2 FX List Editor (GT2105-Q, GT2104-R only)
*1
Ethernet connection
*2
16 - 15
16