■3. Display contents of communication detail setting
The contents of communication detail setting varies according to driver type.
This section explains setting items different from the communication detail setting of GT Designer3.
For setting items other than described in this section, refer to the following.
➠
GOT2000 Series Connection Manual for the controller used
➠
GT Designer3 (GOT2000) Screen Design Manual
POINT
POINT
POINT
Communication parameter setting by GT Designer3
Set the communication parameters for each communication driver at [Communication Settings]
in [Controller Setting] of GT Designer3.
When change the communication parameters after downloading project data, change the setting
at communication detail setting of GOT.
➠
GOT2000 Series Connection Manual for the controller used
➠
GT Designer3 (GOT2000) Screen Design Manual
For bus (A/QnA)
2 - 63
2.10 Controller
2