Restoration Operation - Mitsubishi Electric GOT2000 Series User Manual

15.8.8

Restoration operation

This section describes the restoration operation screen. The screen operation procedure varies depending on the PLC CPU
model used and whether or not passwords have been set. For details of the operating procedure, refer to the following.
➠
Step 1.
Touch [Restore].
Step 2.
Select a CPU No. to be restored from the switches ([CPU No.1], [CPU No.2], [CPU No.3], and [CPU No.4]).
If the controller is FXCPU, touch operations on the switches ([CPU No.1], [CPU No.2], [CPU No.3], and
[CPU No.4]) are invalid.
Step 3.
Touch [Excute].
Step 4.
When the screen shown below appears, touch [YES].
Step 5.
When the screen shown below appears, touch [OK], and input a password using the key window.
15 - 64
15.8 Backup and Restoration
15.8.5 Security and password