4.2.3
USB device status display operation
Step 1.
When the USB peripheral device is installed to GOT, the screen shown below is displayed.
Step 2.
USB mass storage is displayed in Device, and [Stop] button is displayed in Attach.
Step 3.
When the [Stop] button is touched, the dialog box shown below is displayed.
Touch the [OK] button to prepare the USB peripheral devices removal.
Touch the [Cancel] button to cancel the preparation of USB peripheral devices removal.
Step 4.
When the preparation of removal is ready, the dialog box shown below is displayed.
Step 5.
To close the dialog box, touch the [OK] button.
4 - 6
4.2 USB Device Management