Mmc 10 Set Answer Mode - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:42 PM 페이지13
NX-SERIES
HYBRID KEY SYSTEM
MMC 10
This MMC is used to change the answer mode of any station to one of the following
options:
1 RING
2 AUTO ANSWER
3 VOICE ANNOUNCE The keyset will not ring. After a short attention tone, caller can
PROCEDURE
1. Press [TRANSFER] and dial 10
2. Using [VOLUME (-) or (+)], select a station (e. g. 202)
To select all stations, press [VOLUME (-)] first
3. Press [MUTE] or [MESSAGE] to make selection
OR
Using KEYPAD, dial
1 for RING
2 for AUTO ANSWER
or 3 for VOICE ANNOUNCE (e.g. 2)
4. Press [TRANSFER] to save and exit
DEFAULT DATA
RING
RELATED MMC
NONE
The keyset will ring. Calls are answered by pressing [SPEAKER],
or by lifting the handset.
After a short attention tone, the key set will automatically answer
calls via speakerphone. When a C.O. line is transferred to a
keyset in Auto Answer Mode, the keyset will ring until pressing
[SPEAKER], or lifting the handset.
make an announcement but [SPEAKER] button or handset must
be used to respond to the caller.
PROGRAMMING SECTION
SET ANSWER MODE
LCD DISPLAY