Table of Contents
Advertisement
3feature 1999.9.15 12:44 PM 페이지13
NX-SERIES
HYBRID KEY SYSTEM
MEET ME PAGE AND ANSWER
After making an All Page, the user may remain off-hook to allow the paged party
to meet the user for a private conversation.
MESSAGE WAITING INDICATION
When calling a busy or non-answering station, the caller can leave an indication
that a message is waiting. The MESSAGE button will glow red at the called
keyset. A single-line phone will receive a distinctive message-waiting dial tone.
Up to five message-waiting indications can be left at any station.
MICROPHONE ON/OFF PER STATION
The microphone can be disabled at any keyset. When a microphone is disabled,
the user cannot use the keyset as as speakerphone, although on-hook dialing and
group listening are still possible. This feature does not a apply to the NX-6B keyset.
NIGHT SERVICE
There are two kinds of Night Service: MANUAL and AUTOMATIC.
passcode, and can assign Customer level access to MMCs as needed.
CUSTOMER LEVEL
This level requires the Customer level passcode and allows access to
MMCs assigned by the Technician level in MMC 90.
MMC 90 CUSTOMER USE MMC
STATION LEVEL
All keysets can access MMCs 10 through 17 without using a passcode.
Each user can only change data for his/her own keyset.
MEET ME PAGE
MEET ME ANSWER
MMC 70 DIAL NUMBERING PLAN ⇒ MSA: 43 (Message Answer)
MMC 71 SYSTEM KEY PROGRAMMING
MMC 72 STATION KEY PROGRAMMING
MMC 22 CUSTOMER ON/OFF ⇒ MIKE
Manual Night Service
By pressing the NIT button, the system can enter Night Service mode. In
Night Service mode, the NIT button lights red. In Day Service mode, the
NIT button turns off.
MMC 71 SYSTEM KEY PROGRAMMING
MMC 72 STATION KEY PROGRAMMING
: H/F + 56
: 56
MSC: 42 (Message Clear)
MSL: 41 (Message Left)
3 - 9
FEATURES SECTION
Hide quick links:
Advertisement
Table of Contents
