Mmc 35 Assign Station Group - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:43 PM 페이지35
NX-SERIES
HYBRID KEY SYSTEM
MMC 35
This MMC is used to assign members of a station group. There are several options that
can be selected for ringing, overflow, group transfer and overflow destination, and group
type. There may be a maximum twenty (20) groups.
OPTIONS
Ring mode
Overflow time
Group transfer time
Overflow port
Group types
RING MODES
1 SEQUENTIAL
2 DISTRIBUTE
3 CONDITION
4 UNCONDITION
GROUP TYPES
1
2
PROCEDURE
1. Press [TRANSFER] and dial 35
Display shows ring mode of Operator group 500.
2. Using [VOLUME (-) or (+)], select a station group
number (500～519).
3. Press [REDIAL] or [FLASH] to select options
(RING, OVER, TRSF, NEXT, TYPE, MEMBER)
4a. Press [MUTE] or [MESSAGE] to select ring mode
OR
Dial
1 for SEQUENTIAL
2 for DISTRIBUTE
3 for CONDITION
or 4 for UNCONDITION
4b. To change the OVERFLOW TIME, enter 3 digits of
OVERFLOW TIME
4c. To change the GROUP TRANSFER TIME, dial 3 digits
of GROUP TRANSFER TIME
DISPLAY
RING
OVER
TRSF
NEXT
TYPE
DESCRIPTION
The first idle station listed in the group will ring. If the first is busy,
the next idle station will ring.
The first call will ring the first station listed in the group.
The next call will ring the next station listed in the group.
All the stations but non-busy stations listed in the group will ring.
All the stations listed in the group will ring. Busy stations will
receive off-hook ring.
NORMAL GROUP
VMAA GROUP
PROGRAMMING SECTION
ASSIGN STATION GROUP
RANGE
000 ～ 250 sec
000 ～ 250 sec
LCD DISPLAY