Mmc 70 Dial Numbering Plan - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:44 PM 페이지62
NX-SERIES
HYBRID KEY SYSTEM
MMC 70
This MMC provides the access codes and dialing plan needed for operation of features
and programs. The system comes with a wide range of acceptable numbering plans set
as default, and the option to customize the dialing plan. There is also a confirm message
provided due to the chance of duplicating an access or feature code.
PROCEDURE
1. Press [TRANSFER] and dial 70
2. By pressing [MUTE] or [MESSAGE], select the
desired numbering plan group (STATION, STATION
GRP, TRUNK, TRUNK GRP or FEATURE)
3. Search the desired numbering plan entry by pressing
[VOLUME (-) or (+)]
4. Enter digits via the dial keypad (Max 3digits)
5. Press [VOLUME (-) or (+)] to enter change and
continue to make changes
OR
Press [MUTE] or [MESSAGE] to enter change and
continue to selecting numbering plan groups in step 2
If confirm message appears indicating duplication of
access code, dial
0 for no change
1 for change
6. Press [TRANSFER] to save and exit
DEFAULT DATA
ACC
ALM
AMD
ATH
BRG
CBK
CMP
CNF
COS
CPS
DND
DOR
DIAL NUMBERING PLAN
: 47 : ACCOUNT CODE
: 58 : ALARM
: 68 : ANSWER MODE
: 65 : AUTHORIZATION CODE
: 40 : BARGE-IN
: 44 : CALL BACK
: 45 : CAMP-ON
: 46 : CONFERENCE
: 59 : CLASS OF SERVICE
: 54 : CHANGE PASSCODE
: 64 : DO NOT DISTURB
: 13 : DOOR
PROGRAMMING SECTION
LCD DISPLAY