Mmc 45 Trunk Group - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:43 PM 페이지46
NX-SERIES
HYBRID KEY SYSTEM
MMC 45
This MMC is used to set the free trunk selection type to a specific trunk, trunk group, or to
several trunk groups.
There are eleven (11) trunk groups: 9 and 80 through 89, and three types of selecting a
free trunk line in the group.
MODE
DISTRIBUTE
High to Low
Low to High
PROCEDURE
1. Press [TRANSFER] and dial 45
Display shows the first free trunk selection type
2. Using [MUTE] or [MESSAGE], select the free trunk
selection mode
OR
Using KEYPAD, dial
1 for DISTRIBUTE
2 for High to Low
or 3 for Low to High.
3. Using [VOLUME (-) or (+)], select the trunk group
4. Press [REDIAL] or [FLASH] to scroll through the group
If dialed number is the member of another trunk group,
the trunk number will removed from the previous group
automatically. Dialed number overwrites the previous number.
5. Enter a valid trunk number
6. Press [TRANSFER] to save and exit
DEFAULT DATA
GROUP 9
GROUP 80~89
RELATED MMC
NONE
DESCRIPTION
Searches the trunk group in circular order. Each time the group is
accessed, the next available trunk in the group is selected.
Searches the trunk group last to first trunk in the group. If a trunk
is busy, the previous available trunk in the group is selected.
Searches the trunk group. If the first trunk in the group is busy,
the next iavailable trunk in the group is selected.
: All trunk lines
: NONE
PROGRAMMING SECTION
TRUNK GROUP
LCD DISPLAY