Mmc 31 Ext/Trk Use - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:43 PM 페이지31
NX-SERIES
HYBRID KEY SYSTEM
MMC 31
This MMC is used to allow trunks the ability to answer incoming calls, to dial out, or to do
both, on a per-station basis. Those abilities are displayed as Y or N for each action
(e.g. NY: disallow dialing out and allow answering incoming calls).
DIAL DIGIT
00
01
10
11
PROCEDURE
1. Press [TRANSFER] and dial 31
2. Using [VOLUME (-) or (+)], Select a station (e.g. 202)
To select all stations, press [VOLUME (-)] first
3. Select trunk number by pressing [REDIAL] or [FLASH]
repeatedly
To select all trunks, press [REDIAL] first
4. You can select NN, NY, YN or YY stations (e.g., NY)
Using KEYPAD,
0 for deny the action
1 for allow the action
(Two digits must be dialed. First digit for dialing out,
and second for answering incoming calls.)
5. Press [TRANSFER] to save and exit
DEFAULT DATA
ALL TRUNK : YY
RELATED MMC
NONE
TRK USE DESCRIPTION
NN You cannot either dial and answer
NY You cannot dial but can answer
YN You can dial but cannot answer
YY You can both dial and answer
PROGRAMMING SECTION
EXT/TRK USE
LCD DISPLAY