Toll Restriction; Toll Restriction Override; Tone Or Pulse Dialing; Traffic Report Printout - Samsung NX-308 Technical Manual

3feature 1999.9.15 12:45 PM 페이지18
NX-SERIES
HYBRID KEY SYSTEM

TOLL RESTRICTION

There are 250 allow and 250 deny entries of 11 digits each. Each of these
entries can apply to dialing classes B, C, D and E. Class A stations have no
dialing restrictions and class F stations cannot make outside calls.

TOLL RESTRICTION OVERRIDE

There are several methods of the toll restriction override.

TONE OR PULSE DIALING

Outside lines can be programmed for either tone or pulse dialing to meet local
telephone company requirements.

TRAFFIC REPORT PRINTOUT

The traffic report contains totals for incoming, outgoing, and intercom calls on a
system-wide and a per-station basis. This report can be set to print automatically
MMC 30 STATION TOLL CLASS
MMC 60 TOLL DENY TABLE/APPLY
MMC 61 TOLL ALLOW TABLE/APPLY
MMC 65 ASSIGN WILD CHARACTER
System Speed-Dial Toll Restriction Override
This option allows system Speed-Dial numbers to follow or bypass a
station's toll restriction class.
MMC 66 SYSTEM SPD-DIAL TOLL RESTRICTION
Authorization Code
Authorization codes are used to validate a station user and give
permission to make a call. Each authorization code is associated with a
toll class. When the code is entered, the station toll class is changed to
that of the authorization code.
MMC 63 AUTHORIZATION TABLE
Walking Class of Service
You can change a restricted station's toll class to the same class as your
station by entering the walking COS ID, the station number, and the
station passcode. The default station passcode '1234' cannot be used.
MMC 70 DIAL NUMBERING PLAN ⇒ COS: 59
Urgent Code
The system provides a maximum of five urgent codes. These codes can
be accessed by any class of service, and are useful to allow access to
emergency numbers.
MMC 64 OVERRIDE TABLE
MMC 41 TRUNK DIALING TYPE
3 - 14
FEATURES SECTION