Table of Contents
Advertisement
3feature 1999.9.15 12:44 PM 페이지12
NX-SERIES
HYBRID KEY SYSTEM
line, trunk group, or Speed-Dial number whenever the station goes off-hook. A
hot line delay time of 1 to 9 seconds can be programmed to allow sufficient time
to make a different call.
IN GROUP / OUT OF GROUP
Individuals assigned to a station hunt group may temporarily remove their
telephones from the group by pressing the IOG button. Stations out of a group
will not receive calls to that group but will continue to receive calls to their
individual extension numbers. When desired, the user may put him/herself back
into the group by pressing the button again. Users who do not have this button
may dial an access code.
INCOMING CALL DISTRIBUTION
Incoming calls can be assigned to ring a distributed station hunt group. This will
allow all members of the group to share the call load.
INCOMING / OUTGOING SERVICE
Programming allows any outside line to be used for incoming calls only, outgoing
calls only, or both.
INDIVIDUAL LINE CONTROL
Each station in the system can be programmed to allow or deny dialing out.
Each outside line may be programmed to allow or deny answering.
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset without interrupting
normal system operation. There are three levels of system MMC programming:
Technician, Customer, and Station.
MMC 25 HOT/WARM LINE
MMC 70 DIAL NUMBERING PLAN ⇒ IOG: 53
MMC 71 SYSTEM KEY PROGRAMMING
MMC 72 STATION KEY PROGRAMMING
MMC 35 ASSIGN STATION GROUP
MMC 43 ASSIGN TRUNK RING
MMC 31 EXT/TRK USE
MMC 31 EXT/TRK USE
MMC 20 OPEN PROGRAMMING
MMC 21 CHANGE PASSCODE
TECHNICIAN LEVEL
The Technician level has access to all programs via the Technician
3 - 8
FEATURES SECTION
Hide quick links:
Advertisement
Table of Contents
