Using Database Downloading Program; Downloading; Open File - Samsung NX-308 Technical Manual

5APPENDIX 1999.9.15 12:41 PM 페이지9
NX-SERIES
HYBRID KEY SYSTEM
6) Choose Download / Serial Port***
7) Check COM port in the Select serial port check box
8) Select OK button.

4. Using database downloading program

4.1 Downloading

1) Choose DOWNLOAD / Download to File***.
2) Input file name that will contain the MMC data.
3) Select Download button.
4) "DOWNLOADING... Press ESC key to cancel" will be displayed on the
screen. It will take about 15 minutes to finish database downloading.
NOTE:
If the download fails, recheck the setup as described above and repeat the process.
If the Program stops during downloading, please wait for 5-10 sec, until the program
r e s t a r t s .

4.2 Open file

You can now open the downloaded database file.
1) Click MMC page tab that you want to see.
or
2) You can use another editor e.g.) the built-in DOS editor, Notebook, or another
Windows editor.
APPENDIX B DATABASE DOWNLOAD
Figure 1.3 Port dialog box
Figure 1.4 Input File name dialog box
5 - 7