Remote Programming; Port Status Check; Power Failure Transfer; Prime Line Selection - Samsung NX-308 Technical Manual

3feature 1999.9.15 12:44 PM 페이지15
NX-SERIES
HYBRID KEY SYSTEM

PORT STATUS CHECK

Users can view their port status on the LCD. Any one of sixteen (16) status items
(IDLE, BUSY, CALLBACK, PROGRAM, etc) may be displayed.

POWER FAILURE TRANSFER

In the event of commercial power loss, the first two outside lines can
automatically connect to the last two single-line stations. When power is restored
to the system, the lines and stations will return to normal operation. Calls in
progress at these stations will be disconnected.

PRIME LINE SELECTION

Any station can be programmed to select a specific line, line group, telephone
number, station, or station group.
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
PROGRAMMABLE LINE PRIVACY
Each outside line can be programmed to ignore automatic line privacy. This
allows up to four other parties to join your conversation by simply pressing that
line button. This is similar to 1A2 key telephone operation.
PROGRAMMABLE TIMERS
There are 23 programmable system timers to allow the installation to be
customized to the end user's application.
RECALLS
Calls put on hold, transferred, or camped-on to any station will recall to the
originating station if not answered within the programmed period of time. A recall
that goes unanswered for the same period of time will recall to the system operator
group. Hold and transfer recalls each have individual programmable timers.

REMOTE PROGRAMMING

NX-SYSTEM remote programming allows the technician to access the system
MMC 92 PORT STATUS
MMC 31 EXT/TRK USE
MMC 42 TRUNK ON/OFF ⇒ 1A2 EMULATION
MMC 50 SYSTEM TIMERS
MMC 50 SYSTEM TIMERS
3 - 11
FEATURES SECTION