Mmc 94 Halt Process - Samsung NX-308 Technical Manual

4Programming 1999.9.15 12:44 PM 페이지74
NX-SERIES
HYBRID KEY SYSTEM
MMC 94
Use only in the event that all data processing must be stopped.
The four-digit Technician Passcode is required to access this MMC. This MMC will not
interfere with any call in progress, but attempting a new call will result in a busy tone.
PROCEDURE
1. Press [TRANSFER] and dial 94
2. Enter Technician passcode.
3. Press [MUTE] or [MESSAGE] to select data.
OR
Using KEYPAD, dial
0 for PROCESSING
1 for HALT
4. Press [TRANSFER] to save and exit.
DEFAULT DATA
PROCESSING
RELATED MMC
NONE
PROGRAMMING SECTION
HALT PROCESS
LCD DISPLAY