Reviewing Exported Data; Data Fields Output - GE Sievers Innovox Operation And Maintenance Manual

Chapter 6: Analyzer Operation

Reviewing Exported Data

When the Analyzer exports data via the USB or Ethernet ports, the export data includes the following:
Field
1 Date
2 Sample Name
3 Analysis Mode
4 Stream Number
5 NPOC (ppm)
6 TOC (ppm)
7 IC (ppm)
8 TC (ppm)
9 Converted Result
10 Unit
11 Reject
12 Acid (%)
13 Oxid (%)
14 Range Mode
15 Range
16 Sparge (min.)
17 Flush
18 Blank Correction
19 Resuspend
20 Pressure (psi)
21 Man Dilution
22 Calibration Name
23 Calibration Date
24 Error/Warning
25 CO (mg)
2
26 Mass Response (µg)
27 Equation
28 Method ID
29 Leak Check Ratio
GE Analytical Instruments ©2016
Table 13: Data Fields Output
Value
MM/DD/YYYY HH:MM
Stream 1-5, Check Standard, User-Entered Sample Name (Up to
30 characters)
NPOC, TOC, IC, TC
Blank, 1, 2, 3, 4, or 5
Y or N
Manual or Auto
Up to 100, Up to 1,000, Up to 5,000, Up to 20,000, Up to 50,000
OFF, DI, 1S, 2S, 3S, 4S, or 5S
ON or OFF
OFF
Ambient pressure, psia
Manual Dilution Numeric Value
Alphanumeric characters
MM/DD/YYYY HH:MM
Error/Warning Number
Mass of CO
Conversion factor equation
Conversion factor name
Diagnostic should be <1.008
Output Options (if Available)
measured (mg). Rejects are not reported.
2
155 of 270 DLM 68100-09 EN Rev. A