Intercept Console At Night - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
Input sequence
A 1 5 1 7
B +
C +
D *
E 15
F <OK>
G +
H *
J 15
<OK>
K
L <F8>
10.6.8.2

Intercept console at night

In Hicom 100E, ext. 11 is defined as the intercept console during the night by default. All
incoming calls at night which were not dialled using an extension DDI number but with the
console code (Section 10.6.8.3) are signalled at the intercept console. Moreover, incoming
calls which could not be switched can also be signalled at the intercept console (see "Defining
intercept criteria", Section 10.6.9).
An extension or a call group can be an intercept console during the night.
Since the intercept console during the night is assigned to a call destination list (Section
10.6.4), the call settings defined in this call destination list are applicable.
Example: call group 881 is to act as the intercept console at night.
Input sequence
A 1 5 1 4
B *
C 881
D <OK>
E <F8>
A different extension or call group can be programmed as the intercept console at night by
entering another extension number under point C.
10-52
Meaning
Intercept console per line during the
day
(select line 1–32 with "+" and "–" or
directly with "#")
Scroll to line 2
Scroll to line 3
Change input
Select intercept console
Confirm input
Scroll to line 4
Change input
Select intercept console
Confirm input
Return to Start menu
Meaning
Intercept console at night
Change input
Select intercept console
Confirm input
Return to Start menu
Display
Line 1: 11
Line 2: 11
Line 3: 11
Line 3:
Line 3: 15
Line 3: 15
Line 4: 11
Line 4:
Line 4: 15
Line 4: 15
System administration
Display
Ext. no.: 11
Ext. no.:
Ext. no.: 881
Ext. no.: 881
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99