Data Compression/Extension (As Of Sw Version 2.0.2); Call Detail Recording; Changing The Data Record Output Format - Siemens Hicom 100 E Service Manual

Programming guide
System settings
10.7.14.9

Data compression/extension (as of SW version 2.0.2)

It is possible to output non-compressed display data for applications at the "Data adapter". The
compression can be (de)activated for each extension.
Example: ext. 13 is to output non-compressed display data.
Input sequence
1 8 2 0
A
B +
C +
*
D
E 0
F <OK>
G <F8>
Data compression is reactivated by entering "1" under point E.
10.7.15

Call detail recording

The CDRC data (call detail recording, central) in Hicom 100E can be changed as required.
10.7.15.1

Changing the data record output format

You can choose between two data record formats that can be output via a V.24 interface.
If a call charge computer is connected, the default compressed output format is required,
whereas if a call charge printer is connected, the full output format is required.
Example: change to non-compressed output format.
Input sequence
A 1 1 3 1
B *
C 1
D <OK>
E <F8>
The compressed output format can be activated by entering "0" under point C.
10-72
Meaning
Data compression for ext. 11
(select ext. 11 to 74 with "+" and "–"
or directly with "#")
Data compression for ext. 12
Data compression for ext. 13
Change input
Select compression NO
Confirm input
Return to Start menu
Meaning
Output format
Change input
Non-compressed output format
Confirm input
Return to Start menu
Display
ext. 11: yes
ext. 12: yes
ext. 13: yes
ext. 13:
ext. 13: no
ext. 13: no
System administration
Display
Output: compressed
Output:
Output: full
Output: full
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99