Changing Line Length - Siemens Hicom 100 E Service Manual

Programming guide
Analogue trunk
10.2.4

Changing line length

The default entry "Short line" may have to be replaced by "Long line" in order to match the level
of the relevant line(s) when the attendant console and the system are very far apart. Description
of error: invalid selection or call inaudible. This entry can be assigned per analogue trunk line.
Example: analogue trunk line 1 is to be defined as a "long line".
Input sequence
A 204
B *
C 1
D <OK>
E <F8>
The "short line" status can be reset by entering "0" under point C.
10-6
Meaning
Length of line 1
(select line 1- 32 with "+" and "–" or
directly with "#")
Change input
1 for "long line"
Confirm input
Return to Start menu
Display
Line 1: short
Line 1
Line 1: long
Line 1: long
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99