Defining Intercept, Incomplete Ddi Number; Defining Intercept, Recall (As Of Sw Version 2.0.2) - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
10.6.9.4

Defining intercept, incomplete DDI number

If an external ISDN caller dials an incomplete DDI number, this call is automatically forwarded
to the intercept console after approx. 20 seconds. This intercept feature can be deactivated by
appropriate programming, so that an external ISDN caller hears the "busy" tone (after approx.
20 seconds in this case). The definition applies to the entire system.
Example: programming intercept override, incomplete DDI number.
Input sequence
A 1 5 1 5 4
B *
C 0
D <OK>
E <F8>
Intercept, incomplete DDI number can be reactivated by entering "1" under point C.
10.6.9.5

Defining intercept, recall (as of SW version 2.0.2)

A recall request for an extension can be automatically forwarded to the intercept console if the
extension is busy or if there is no answer after a set period of time.
Example: programming intercept console, recall.
Input sequence
A 1 5 1 5 5
B *
C 1
D <OK>
<F8>
E
The intercept feature can be reactivated by entering "0" under point C.
10-56
Meaning
Intercept, incomplete DDI no.
Change input
Select intercept override
Confirm input
Return to Start menu
Meaning
Intercept, recall
Change input
Select intercept
Confirm input
Return to Start menu
Display
Intercept: yes
Intercept:
Intercept: no
Intercept: no
System administration
Display
Intercept: no
Intercept:
Intercept: yes
Intercept: yes
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99