Route Names - Siemens Hicom 100 E Service Manual

10.3.10

Route names

Each of the 4 routes can be assigned a name which appears on system telephone displays.
An optiset(E) memory telephone is required to enter route names.
Example: route 1 is to be called "trunk".
Input sequence
A 1 6 5 (up to
SW2.0.2)
1 6 15 (as of SW 2.1)
B *
C Trunk
D <OK>
E <F8>
An assigned name can be deleted by pressing the F3 key under point C.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Name for route 1
(select route 1–4 with "+" and "–" or
directly with "#")
Change input
Name for route 1 = "trunk"
Confirm input
Return to Start menu
Programming guide
Networking
Display
Route 1: –
Route 1:
Route 1: trunk
Route 1: trunk
System administration
10-15