Normal Extensions; Trunk Access, Night, Up To Sw Version 2.0.1 - Siemens Hicom 100 E Service Manual

10.5.4.10

Normal extensions

The normal extensions are assigned to one of the 4 (up to SW 2.0.1+) or 15 (as of SW 2.0.2)
possible day reference extensions and thus have the same trunk access during the day as
these reference extensions.
Example: ext. 12 should correspond to reference extension 11 and ext. 14 to reference
extension 13, see also Section 10.5.4.9.
Input sequence
A 1 4 1
B #
C 12
D <OK>
E #
F 14
<OK>
G
H *
1
J
K 13
L <OK>
M <F8>
The class-of-service assignment can be changed by entering another reference extension
under point K.
10.5.4.11

Trunk access, night, up to SW version 2.0.1+

Individual night-time trunk access per line can be defined for up to 4 extensions. Each of these
4 extensions can be a reference extension for any other Hicom 100E extension. Thus, there
can be up to 4 different groups of extensions with the same night-time trunk access.
10.5.4.12 Trunk access, night, up to SW version 2.0.2
Individual night-time trunk access per line can be defined for up to 15 extensions. Each of these
15 extensions can be a reference extension for any other Hicom 100E extension. Thus, there
can be up to 15 different groups of extensions with the same night-time trunk access.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Trunk access during the day for ext. 11
on line 1
(select ext. 11–74 directly with "#",
lines 1–32 by scrolling with "+" and "–
")
Select extension
Enter extension 12
Trunk access during the day for ext. 12 Ext. 12: as for ext. 11
Select extension
Enter extension 14
Trunk access during the day for ext. 14 Ext. 14: as for ext. 11
Change input
Select reference ext.
Enter reference ext.
Input
Return to Start menu
Programming guide
Station attributes
Display
Ext. 11, line 1: seized
Ext.:
Ext.: 12
Ext.:
Ext.: 14
Change for ext. 14:
Ref. for ext. 14:
Ref. for ext. 14: 13
Ref. for ext. 14: 13
System administration
10-35