Station Names; Doorphone Setup; Setting Up An Entrance Telephone (Up To Sw 2.0.1+) - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
Input sequence
+
F
G *
H 14
J <OK>
K <F8>
Members can be deleted from an executive-secretary group by pressing the F3 key under
points C and H.
10.5.1.12

Station names

Each extension can be assigned a name which then appears on the system telephone's
display.
An optiset (E) memory telephone is necessary to enter station names.
Example: ext. 11 is to be called "CO"
Input sequence
A 1 3 2 (up to 2.0.1+)
1 3 1 2 (as of 2.0.2)
B *
C CO
D <OK>
E <F8>
An existing extension name can be deleted by pressing the F3 key under point C.
10.5.2

Doorphone setup

10.5.2.1

Setting up an entrance telephone (up to SW 2.0.1+)

An entrance telephone can be connected to a free a/b extension port. The number of the
entrance telephone extension is programmed for this purpose.
The entrance telephone must be connected via a door opener adapter if the receiving extension
for the doorbell and the door opener features are to be used.
10-24
Meaning
Scroll to the next station
Change input
Secretary telephone is ext. 14
Confirm input
Return to Start menu
Meaning
Name for ext. 11
(scroll through ext. 12–74 using "+"
and "–" or call directly with "#")
Change input
Name for ext.11 = CO
Confirm input
Return to Start menu
Display
Group 1, station 3: -
Group 1, station 3:
Group 1, station 3: 14
Group 1, station 3: 14
System administration
Display
Ext. 11: -
Ext. 11:
Ext. 11: CO
Ext. 11: CO
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99