Resetting Active Individual Code Lock - Siemens Hicom 100 E Service Manual

Input sequence
1
H
J <OK>
K <F8>
Extensions can be deleted from a call pickup group by pressing the F3 key under points D and
H.
*) as of SW 2.0.2, the term "group" will no longer appear in the display (group number only).
10.5.1.7

Resetting active individual code lock

You can reset an extension's individual telephone lock code number (PIN) to the default PIN
("00000"). You can, therefore, unlock a locked extension if you forget your PIN.
As of SW 2.0.2, it will also be possible to reset the code number of an entrance telephone with
the DTMF opener.
Example: set PIN for ext.12 to "00000".
Input sequence
A 1 3 8 (up to 2.0.1+)
1 3 1 8 (as of 2.0.2)
B +
C *
D 0
E <OK>
F <F8>
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Call pickup group 1 for ext. 13
Confirm input
Return to Start menu
Meaning
Reset PIN for ext. 11?
(select ext. 11–74 with "+" and "–" or
directly with "#")
Reset PIN for ext. 12?
Initiate reset
Perform reset
Confirm input
Return to Start menu
Programming guide
Station attributes
Display *)
Ext. 13: group 1
Ext. 13: group 1
System administration
Display
Ext. 11: *****
Ext. 12: *****
Ext. 12:
Ext. 12: 0
Ext. 12: *****
System administration
10-21