Extension Number Plans Of The Add-On Modules - Siemens Hicom 100 E Service Manual

3.3.2

Extension number plans of the add-on modules

The extension number plans of the add-on modules have been changed relative to that of
SW 2.0.1. The new assignment of the extension numbers and line numbers ensures consistent
numbering at all times whenever the system is expanded. Attention must be paid to the new
equipping sequence for extension and trunk modules.
Figure 3-2 Equipping sequence for extension and trunk modules
The structure of the extension number plans is described in more detail in Chapter 5,
Installation of the Service Manual (see Section 5.5).
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Extension module
Trunk module
Slot 2
Slot 1
View from the PSU side
Standard extension number plans
MB
Overview of modules
Slot 4
Slot 3
3-9