Group Ringing Mode - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
Example: extensions 13, 14, and 21 are to be members (destinations) of the shared call group
883.
Input sequence
A 1 5 1 6 1
B #
C 883
D <OK>
E *
13
F
<OK>
G
H +
J *
K 14
<OK>
L
M +
*
N
O 21
P <OK>
R <F8>
Members (destinations) of a call group can be deleted by pressing the F3 key under point F,
K or O.
10.6.2.2

Group ringing mode

A group ringing mode can be defined for each of the 8 call groups.
The following ringing modes are possible:
Type 1 – Cyclical group call":
Type 2 – "Linear group call":
Type 3 – "Group ringing":
Type 4 – "Group ringing, no answer": All idle extensions ring simultaneously.
10-40
Meaning
Members (destinations) of group 881
(select group 881 to 888 directly with
"#", scroll to destinations within a
group with "+" and "–")
Select group
Enter group 883
Confirm input
Change input
First destination = ext. 13
Confirm input
Scroll to destination 2
Change input
Second dest. = ext. 14
Confirm input
Scroll to dest. 3
Change input
Third dest. = ext. 21
Confirm input
Return to Start menu
All idle destinations ring consecutively, starting with the
ext. after the last destination called.
All idle destinations ring consecutively, always
starting with the first destination in the group.
All idle extensions ring simultaneously.
If an ext. is busy, however, the incoming call is
camped-on at this ext. only.
Display
Group 881, dest.1: –
Group:
Group: 883
Group 883, mbr.1: –
Group 883, mbr.1:
Group 883, mbr. 1: 13
Group 883, mbr. 1: 13
Group 883, mbr. 2: –
Group 883, mbr. 2:
Group 883, mbr. 2: 14
Group 883, mbr. 2: 14
Group 883, mbr. 3: –
Group 883, mbr. 3:
Group 883, mbr. 3: 21
Group 883, mbr. 3: 21
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99