Installing Caracas Desk; Setting Up And Initial Operation Of Caracas Desk; Figure 11-14Wall Mounting With Closed Housing And Opened Hinged Cover - Siemens Hicom 100 E Service Manual

Plus products
Entrance telephones
11.4.1

Installing Caracas Desk

V.24 line lengths (10m in each case) must be observed.
Insert the polarized lithium battery in the module slot provided (housing must be open).
Attach to wall at 2 fixing points (suspend from above, screw in below).
Cabling to Hicom 118, to printer, connection to plug-in PSU.
Slots in
rear of
housing
Connections:

Figure 11-14Wall mounting with closed housing and opened hinged cover

11.4.2

Setting up and initial operation of Caracas Desk

The U to the system must be connected to the 1st Hicom 118 U
P0/E
Up to three add-on devices (min. one) can be connected to the reception telephone, the
1st for hotel features, the 2nd and 3rd mainly for room keys.
The printer is to be set to 2400 baud, no parity, 1 stop bit and 8 data bits.
The Hicom 118 V.24 interface is to be set to 9600 baud.
Select "Port assignment" 1 for CDRC port under the code 21 32 in the "System settings"
menu.
Central call detail recording in Hicom 118 is to be set to compressed output format, without
recording incoming calls and without a On ringing.
Only use the original plug-in power supply unit.
The following sequence is recommended when putting the Caracas Desk into operation:
11-16
1 2 3 4 5
Connections:
1 = V.24 cable to the printer
2 = V.24 cable to Hicom 118*
3 = Plug-in power supply unit
4 = Reception telephone
5 = 1st Hicom 118 UP0/E interface
* V.24 adapter cable (2m) + accompanying V.24 cable (8m)
Hicom 100 E Version 2.1, Service manual
.
P0/E
A31003-K16-X001-3-7620
,
07/99