Caller List (As Of Sw Version 2.0.2); Call Trace (As Of Sw Version 2.0.2) - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
10.5.1.8

Caller list (as of SW version 2.0.2)

Each extension is authorised (default) to use an individual caller list.
This class of service can be blocked.
Example: block caller list for ext. 12.
Input sequence
1 3 2 0
A
B +
C *
D 0
E <OK>
<F8>
F
A caller list can be released again by entering "1" under point D.
10.5.1.9

Call trace (as of SW version 2.0.2)

If the "call trace" feature (tracing nuisance/malicious callers) has been released by Telecom,
this class of service can be assigned to all extensions.
Example: ext. 13 is assigned call trace class of service
Input sequence
A 1 3 2 1
B +
C +
D *
E 1
F <OK>
G <F8>
Call trace class-of-service can be deactivated by entering "0" under point E.
10-22
Meaning
Caller list for ext. 11
(select ext. 11–74 with "+" and "–" or
directly with "#")
Caller list for ext. 12
Change input
Block call list
Confirm input
Return to Start menu
Meaning
Call trace class of service for ext. 11
(select ext. 11–74 with "+" and "–" or
directly with "#")
Call trace class of service for ext. 12
Call trace class of service for ext. 13
Change input
Enable call trace
Confirm input
Return to Start menu
Display
Ext. 11: yes
Ext. 12: yes
Ext. 12:
Ext. 12: no
Ext. 12: no
System administration
Display
Ext. 11: not enabled
Ext. 12: not enabled
Ext. 13: not enabled
Ext. 13:
Ext. 13: enabled
Ext. 13: enabled
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99