Preparing for Installation
Overview
Before you begin, make sure that the module is in good condition and that you have
the tools and equipment listed here.
Unpacking and Inspecting the Module
As you unpack the module, inspect it for shipping damage. If you find any damage,
contact Customer Service. Refer to Chapter 6 for information on contacting Cisco
Services.
Equipment and Tools Needed
Before you begin, make sure that the module is in good condition. You need the
following equipment and tools to install these modules.
You need . . .
a Prisma II Chassis with power
supply
3/8-in. flat-blade screwdriver
optical cables with connectors
2-2
To . . .
provide housing, power and input/output
connections to the module.
secure the module in the chassis.
carry optical input and output signals.
Installation
78-739260-01 Rev F