Chapter 1 Introduction; Overview - Cisco Prisma II Installation And Operation Manual

Overview

Introduction
This chapter describes the Prisma II
following products.
Prisma II Optical Amplifier (1x13 dBm)
Prisma II Optical Amplifier (1x16 dBm)
Prisma II Optical Amplifier (1x17 dBm)
Prisma II Optical Amplifier (1x20 dBm)
Installation procedures and most operational procedures are identical for all
products.
Qualified Personnel
Only appropriately qualified and trained personnel should attempt to install this
product.
WARNING:
Allow only qualified personnel to install, operate, maintain, and service this
product. Otherwise, personal injury or equipment damage may occur.
Who Should Use This Guide
This guide is intended for authorized personnel who have experience working with
similar equipment. The personnel should have appropriate background and
knowledge to complete the procedures described in this guide.
In This Chapter
This chapter contains the following topics.
Description
The Front Panel
The Back Panel
Configuration Overview
78-739260-01 Rev F
Chapter 1
Introduction
Optical Amplifiers. This guide covers the
™
Prisma II Optical Amplifier (2x17 dBm)
Prisma II Optical Amplifier (4x17 dBm)
Prisma II Optical Amplifier (8x17 dBm)
Prisma II Post Amplifier
Topic
Introduction
See Page
1-2
1-5
1-6
1-7
1-1