Accessing The Module Details Window - Cisco Prisma II Installation And Operation Manual

Accessing the Module Details Window

Introduction
Information about a module (its parameters, alarms and statuses) is located in the
Module Details window. The graphic below shows the Module Details window for a
Prisma II Optical Amplifier.
Within the LCI module tree, you can access this window using one of the following
four methods:
• Double-click the chassis and select the module in the graphic that appears.
• Right-click the chassis and select Open from the menu that appears.
• Double-click the module.
• Right-click the module and select Details from the menu that appears.
Note: Although you can use the method that's most convenient for you, the
procedures throughout this chapter are described using the right-click module
technique.
For more information about the module tree, refer to LCI Module Tree Overview
earlier in this chapter.
4-12 Operation Using LCI 78-739260-01 Rev F