Cisco Prisma II Installation And Operation Manual page 80

Boot Dialog for ICIM/SNMP Configuration,
Restarting the ICIM
The boot selection dialog appears again.
For each of the following questions, you can press <Return> to
select the value shown in braces, or you can enter a new value.
How should the board boot?
1. pROBE+ (for debugging)
2. TFTP
3. Run ICIM Application
Which one do you want? [2] 3
1. Select 3 to indicate that the normal ICIM application should be run (instead of
TFTP).
Result: The summary page appears.
2. Do nothing and when the 5 second timeout expires, the ICIM restarts
normally.
3-40
(for code download)
Operation Using the ICIM
Continued
78-739260-01 Rev F