System Requirements
Introduction
You will need the following computer software and hardware to run LCI.
Computer Requirements
Pentium II 300 MHz processor or equivalent
•
128 MB RAM
•
10 MB available hard drive space
•
1.44 MB floppy drive
•
CD-ROM Drive
•
Windows 95 or later operating system software
•
Connecting the PC to the Prisma II Chassis
The required cable is a standard DB9 Female to DB9 Male serial extension cable. The
connectors are a serial 9-pin D-shell (EIA 574/232).
The part number for a six-foot DB9 Female to DB9 Male extension cable is 180143.
78-739260-01 Rev F
Operation Using LCI
4-3