Cisco Prisma II Installation And Operation Manual page 69

SNMP Configuration Capability,
Setting Up the IP Configuration Parameters for SNMP Support
Follow these steps to set up the IP configuration parameters.
1.
Press the
Result: The ICIM menu appears.
2. Select the Password menu and enter the User Password.
Result: The ICIM allows configuration changes for the next 10 minutes.
Note: Refer to your specific hardware Installation and Operation Guide for
more information on using, entering, or changing the ICIM user password.
3.
Press the
Result: The ICIM menu appears.
4.
Use the
5.
Press the
Result: The IP Setup menu appears, as shown above.
6.
Use the
parameter; IP Address, IP Subnet, or Gateway IP.
78-739260-01 Rev F
Continued
key.
ICIM
key.
ICIM
key to scroll down until IP Setup is highlighted.

key.
SEL
- - - - - - - - - -
S h e l f
S l o t
- - - - - - - - - -
I P
1 7 2 . 1 8 . 9
. 2 2 7
I P
2 5 5 . 2 5 5
. 2 5 5 . 0
G a t e w a y
1 7 2 . 1 8 . 9
. 2 5 4
or keys to scroll to and highlight the desired configuration
 
Operation Using the ICIM
I C I M
7
1 5
A d d r e s s
S u b n e t
I P
3-29