Table of Contents
Advertisement
Configuration
3.
4.
5.
Document 800-03097 Rev C
03/09
Figure 3-63
Highlight the field beside Port, and press
and USB-Serial (1~4).
Note
If you have set the Port as None, then you will not be able to
make any changes to the screen.
Note
When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
Highlight Setup..., and press
recommended settings when configuring the RS232, RS485 or USB-Serial ports.
Highlight the field beside Text-In Product, and press
from the list.
Note
The screen changes for different types of text input devices, and
there will be different parameter boxes for you to enter
information.
Text-In Device (Generic Text and EPSON-POS) Settings
Screen
. Use the ATM or POS manufacturer's
. Select from None, RS232, RS485
. Select your device
93
Advertisement
Table of Contents
