Table of Contents
Advertisement
Configuration
Configuring the Alarm-In Inputs
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
You can set up each input on the Alarm-In screen.
1.
2.
3.
4.
Configuring the Actions for each Alarm-In Input
You can set the actions the DVR will take whenever it senses an input on one of its alarm
input connectors.
1.
Document 800-03097 Rev C
03/09
Figure 3-49
Turn each input On or Off by highlighting the alarm number and pressing
Give an input a title by highlighting the Title box and pressing
keyboard appears so you can enter the title.
Set each input as NO (normally open) or NC (normally closed) by highlighting the
field under Type and pressing
Save your Alarm-In changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
Highlight the Actions tab, and the Alarm-In Actions setup screen appears.
Alarm-In Setup Screen
.
.
. A virtual
. Select
81
Advertisement
Table of Contents
