Configuring For Motion Detection; Figure 3-51 Alarm-In Notify - Honeywell HRSD40F User Manual

Configuration
5.
6.
7.

Configuring for Motion Detection

Your DVR has built-in video motion detection. For each camera, you can:
•
•
•
Highlight Motion Detection in the Event menu and press
setup screen appears.
Document 800-03097 Rev C
03/09
Figure 3-51
Toggle the entire list On and Off by highlighting Notification and pressing
Toggle the individual items On and Off by highlighting that item and pressing
. Highlight OK and press
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Highlight a field under the PTZ heading, and press
appears. Select the preset position for each PTZ camera, which is where you want
PTZ cameras to move to whenever the DVR detects an input on the associated
alarm input.
Save your Alarm-In changes by highlighting Save and pressing
Cancel to exit the screen without saving the changes.
Turn motion detection On and Off
Set the sensitivity level from 1 (least sensitive) to 5 (most sensitive)
Select the image area to be monitored for motion detection
Alarm-In Notify
to accept your changes.
. A list of PTZ presets
. Select
. The Motion Detection
.
83