Figure 3-31 Callback Tab - Honeywell HRSD40F User Manual

Configuration
Setting Callback
1.
2.
3.
4.
5.
Document 800-03097 Rev C
03/09
Note The e-mail address must include the "@" character to be a valid
address.
Highlight the Callback tab, and the Callback screen appears.
Figure 3-31
Highlight LAN and press
On you can change the IP addresses.
Highlight the IP Address field that you want to change and press
arrow buttons to enter the IP address of the computer you want contacted during
an event. You can enter up to five IP addresses.
Highlight the field beside Retry and enter the number of times you would like the
DVR to try contacting the computer. You can select from 1 to 10 retries.
Save your Notification changes by highlighting Save and the pressing
Select Cancel to exit the screen without saving the changes.
Note Ensure that the RASplus settings in the PC that receives the
callback message are correctly configured to receive the
callback notification. To do this, ensure that the Port numbers
and DVRNS settings match.
Callback Tab
to toggle between On and Off. When LAN is turned
. Use the
.
65